nozzle spray
英 [ˈnɒzl spreɪ]
美 [ˈnɑːzl spreɪ]
网络 喷嘴
双语例句
- High pressure nozzle spray drier
高压喷嘴式喷雾干燥机 - The axial distribution of fuel vapor near combustion chamber wall surface can be improved by changing nozzle spray angle to improve engine combustion.
通过改变喷油器的油束夹角，可以改善燃油蒸气在燃烧室壁面处的轴向分布情况，改善发动机的燃烧效果。 - She turned the nozzle and the spray concentrated down to a stream.
她掉转喷嘴，让水花集中喷入小河。 - A spraying nozzle of waterborne coating comprises a nozzle and a spray head body;
一种水性涂料喷涂喷头，包括一喷嘴和一喷头体； - Effect of Cavitation inside the Diesel Nozzle on the Spray Characteristics
喷嘴内空穴现象对柴油机喷雾特性的影响 - The results show that the own design nozzle has well spray performance and axial symmetry;
分析结果表明：改良设计的离心喷嘴具用良好的喷雾性能和轴对称性； - Design and test are presented in this paper for the purpose of matching the nozzle spray angle with combustion chamber shape.
这是为改进喷油嘴喷孔夹角与燃烧室形状间的匹配而提出的一种喷孔夹角设计与计算方法。 - Choice of special nozzle of spray gun used on painting container
集装箱喷漆专用喷嘴的选择 - The mechanism of pressure spraying droplets charged by applying high voltage to a nozzle directly or by a corona electrode discharging to the nozzle in spray charging is studied.
研究压力喷雾荷电中两种主要荷电方法&在喷头上施加电压的直接荷电法和在喷头附近安置电晕电极的电晕荷电法的荷电机理； - In this paper, the effects of construction parameters of jet nozzle to the spray of needle type diesel fuel-injection nozzle are discussed.
本文研究了柴油机轴针式喷油咀喷雾部分的结构参数对喷油咀喷雾状况的影响。 - Coupling of supercritical CO_2 extraction and coaxial nozzle spray drying to prepare zanthoxylum oil microcapsule
超临界CO2萃取与同轴喷嘴耦合制备花椒油微胶囊 - Nozzle Spray is very popular in power, chemical, agricultural, and environmental engineering, and it is an important part of the research on two-Phase flow.
喷嘴雾化在能源动力、化工、农业和环境工程中有非常广泛的应用，研究喷嘴雾化的流动特性是两相流研究中一个重要课题。 - In this paper, according to nozzle spray characteristics, energy and mass balance equations for the liquid film on heated surface were founded, and a half empirical and half analysis model involving the heat dissipation is acquired.
本文从喷射雾滴的特性参数出发，以被冷却表面上形成的喷射液膜为对象，考虑了冷却液体向环境的散热，建立质量、能量守恒方程，得到半经验半解析的雾化喷射换热模型。 - Two novel instruments for double nozzle spray drying and cryogenic process, used in microencapsulation of peptides and proteins were introduced and their operating principles were exemplified respectively.
介绍双喷嘴喷雾干燥和超声雾化-低温萃取两种多肽、蛋白质类药物微囊化的新型设备，分别举例阐明两者的工作原理。 - A Study on the Mechanism of Nozzle Spray Noise for the Diesel Engines
柴油机喷嘴喷雾响声产生机理的研究 - Study on Mechanisms of Nozzle Spray Noise and Atomization
检验喷油嘴时清脆响声的产生与雾化的机理研究 - Three-dimensional temperature distribution and solid fraction in a bloom were predicted with complicated boundary heat transfer conditions which involve real nozzle spray flux and individual roll contact in the secondary cooling region of the caster.
以实际铸坯为对象，以二冷区铸坯表面实际水流密度分布和辊子接触传热为边界条件，充分考虑二冷区的四种不同的换热状况，研究连铸大方坯三维温度场。 - Experimental study of swirl nozzle spray angles of wet flue gas desulfurization system
湿法烟气脱硫旋流喷嘴喷雾角试验研究 - On High-Speed Photography of Pintle Nozzle Spray
轴针式喷嘴喷束的高速摄影研究 - AN EXPERIMENTAL STUDY ON SPRAY PERFORMANCES OF TWIN FLUID NOZZLE FOR FLUE-GAS DECONTAMINATION The experiments have been done on a twin fluid nozzle in spray drying chamber of flue-gas decontamination.
本文在烟气净化装置喷雾干燥塔内，进行双流体喷嘴喷雾特性试验，实验研究了影响喷雾粒度、角度、以及液滴均匀度的主要因素。 - The model has taken various parameters for the spray forming process into account, such as nozzle's spray data, eccentric distance, substrate rotation speed, withdrawal speed and so on.
该数学模型考虑了喷射成形过程中各种工艺参数，如喷嘴的雾化参数、偏心距离、沉积盘的旋转速度和下拉速度等参数的影响。 - A Strange Phenomenon of Hole-type Nozzle Spray
一种孔式喷油器分层次异速喷雾现象的研究 - Study on Effect Factors of Needle Shape Nozzle's Spray Characteristics
针形喷嘴雾化特性影响因素的研究 - Study to Design for the Pressure Atomization Nozzle Used for Spray Dust Falling
用于喷雾降尘的压力型雾化喷嘴设计研究 - The cavitation flow in a nozzle at steady spray of a diesel engine was simulated, and the formation mechanism and distribution of cavitation inside the nozzle were analyzed using mixed multiphase flow model coupled with cavitation model.
利用混合多相流体模型加空穴模型的方法，模拟了柴油机孔式喷油嘴稳定喷射时嘴内的空穴流动现象，分析了空穴在喷油嘴内形成机理及其分布情况。 - The result shows that the fuel consumption and emissions are both improved by using the third generation conical spray compared to original multi-hole nozzle spray.
结果表明第三代伞状喷雾燃烧较原机多孔喷雾燃烧下的性能和排放都有所改善。 - By calculation the fluid dynamics software FLUENT riser outlet parameters, simulating of the nozzle spray field to determine the impact of natural wind on the aircraft spray.
通过计算流体力学软件FLUENT，确定了立管最佳出风口参数，模拟了喷头雾化场，确定自然风对该机喷雾影响。 - In order to clearly observe the internal nozzle flow and the structure of near-field spray, utilizing home-made Ring to match the long-distance microscope and digital camera, near the outlet of the nozzle and spray area for 27 times magnification.
为了清晰观察喷孔内部流动结构及近场喷雾结构，利用自制转接环将长距离显微镜与数码相机匹配，对喷孔与近嘴区域的喷雾进行27倍放大。 - Experiment data were significant for design of swirl nozzle and spray generater and their application.
实验数据对旋流喷嘴及急冷器的设计和现场应用具有重要指导意义。 - Analysis of the nozzle shape and size parameters on the nozzle internal flow field. ( 3) High-pressure air nozzle to spray the outside of the simulation process. Analysis of injection pressure and speed the process of change.
分析了喷嘴形状与尺寸参数对喷嘴的内部流场的影响。（3）通过对高压空气喷嘴的外部喷射过程的模拟仿真，分析喷射过程的压力和速度变化，分析喷嘴喷射流场的射流特性。